Permanent Surface Protection
Paint and other floor coatings only last a comparatively short time. ArmorThane coatings will retain benefits for years.
- No chipping or peeling
- Flexible without cracking under wheel weight or weather
- Scratch resistant to heavy foot or vehicle traffic
- Add color chips, particulates
- No discoloring when exposed to chemicals
- Easy to clean – high gloss finish
- Fade resistant – excellent color retention
- Oil proof
- Weatherproof
- Waterproof
- Adds new life
Attractive Flooring Options
Whether residential, commercial or industrial settings, there is no need for owners to settle for plain or clear coated concrete or aging plywood floors. All of these areas can benefit from attractive, long-lasting protection.
- Indoors and Outside Surfaces
- Concrete or Plywood Decks, Porches, Patios
- Basements, Mud Rooms, Dens
- Garage Floors, Driveways, Parking Lots
- Entryways, Showrooms, Retail Outlets
- Manufacturing, Warehouses, Loading Docks
- Schools, Daycare, Healthcare Clinics
- Kennels, Animal Habitats, Veterinary Clinics
- Food Processing Areas
- Workshops, Office Complexes
Note that high-gloss floor coatings may become slippery when wet. Abrasive aggregate should be applied to add slip-resistance. Some are not recommended for areas where people walk with bare feet.
Why Use Roll-On Coatings?
Two ArmorThane products can be applied with a roll-on or trowel process. While these products are rolled on rather than sprayed, they are still extremely durable. They are a perfect solution for dealers who have floor projects that don’t require the proportioning equipment and safety gear of the sprayed on polyurethane and polyurea.
These products are not for DIY projects. Instead, they must be used by professionals who are trained in handling, mixing and applying chemicals. ArmorThane offers this training as part of the initial applicator set-up.
ArmorFloor Coating
ArmorFloor is a two component, aliphatic polyester polyurethane for use in moderate to severe chemical environments in indoor or outdoor applications. Its resilience, durability and UV resistance makes it an excellent choice for a broad range of uses. Slip resistance Color Quartz or other abrasive materials may be applied. Decorative Color Chips are often used for design.
ArmorDeck Coating – Two Step Process
ArmorDeck Basecoat SF is a single component, high solids, solvent free, low odor, environmentally safe, liquid applied, moisture cured, aromatic urethane polyurea elastomeric waterproofing base membrane. It is typically used as an exterior coating on concrete or plywood decks, patios, walkways, marinas and sports areas.
It is imperative that ArmorDeck Topcoat be applied within 48 hours. Slip resistance Color Quartz or other abrasive materials may be applied. Decorative Color Chips are often used for design.
ArmorDeck Topcoat is a polyester, aliphatic, single component, liquid applied, moisture cured, urethane polyurea surface protection coating. This adds durability, excellent weatherability, seamless waterproofing membrane, UV resistance and abrasion resistance.
These products may be applied with a roll-on or trowel process or they can be applied with airless or conventional spraying equipment.
Comparison of Physical Properties
| Physical Properties | Tear* | Tensile* | Elongation* | Surface Hardness* |
|---|---|---|---|---|
| ArmorFloor | NA | NA | NA | NA |
| ArmorDeck Base | ASTM D-624 200-240 pli | ASTM D-412 870-1070 psi | ASTM D-412 575-675% | ASTM D-2240 45-55 Shore A |
| ArmorDeck Topcoat | ASTM D-624 500-600 pli | ASTM D-412 3900-4500 psi | ASTM D-412 225-275% | ASTM D-2240 90-100 Shore A |
*Please note, different application processes and parameters may change these properties. Users should perform their own independent testing as properties are approximate. Technical Data Sheets offer more information.
Also check out spray on products for floors including SureGrip Slip Resistant Soft Polyurea. ArmorThane has an entire line of construction application solutions.